Tracking ideas for Yak

Keep swimming when you should be rafting? Share or beg for tips and technique .
Post Reply
mark_israel
Posts: 6
Joined: Tue Jun 08, 2010 5:56 am

Tracking ideas for Yak

Post by mark_israel » Tue Jun 08, 2010 6:06 am

I'm interested in trying some ideas for getting my Yak to track better in flat water. Here are the options I'm considering:
1) A pole-like keel, as has been suggested previously. Would a 1.2 cm diam 60 in graphite rod affixed to the bottom of the raft make a difference? Does it need to be longer than the raft itself? How much longer? What would be a good way to attach it?
2) What about putting a firm ensolite "girder" with a triangular cross-section (maybe 3 in on a side) V-side down INSIDE the raft bottom, held in place with a firm inflated Thermarest pad on top of it? Would that give the "hull" a sort of v-shape that would track better?
3)Both of the above ideas?

Hig
Posts: 105
Joined: Wed Sep 24, 2008 9:31 pm

Re: Tracking ideas for Yak

Post by Hig » Wed Jun 16, 2010 7:14 am

Hi Mark,

I've messed around a little with a primitive version of your option B, and never got anything to work. I think it has potential though... it'll just take a fair bit of tuning to get it to sit stably and do what you want.

I think a 1.5 cm rod would be enough to have an effect, but only a moderate amount. It's basically a surface-area question, and 1.5 cm x 60 in is not that large an area. The reason I'd use a longer pole than the raft is that it's easy to attach to (you just loop over the ends. But if it's a hollow rod, you could run a string through it's length, then run that up to the two front and two back ties... that wouldn't require it to be as long. If you have something longer, then I think sticking it out the bow instead of the stern might be better, as it will give you more leverage on your paddle stroke.

Other things that help are a weight (usually your pack) up front, and the realization that tracking isn't required in order to make good time on flat water. :)

Post Reply